Quick Answer: Asus notebook how to reconnect the harddrive ?



Also the question is, how do you reconnect your hard drive?

Also know, how do I fix my Asus laptop hard drive?

Moreover, how do I disconnect my laptop and reconnect my hard drive?



Quick Answer, can you disconnect and reconnect a hard drive? To disconnect it, there should be a plug of some sort (which we refer to as a SATA cable) connected to it. Just pop out the HDD and then pull the SATA cable out. Just don’t drop the hard drive. To put it back just plug it back in and go in reverse.Connect the USB cable to the hard drive if not already connected and the other end to a USB port on the computer. Plug the other end of the USB cable into a USB port on the computer. After connecting the external hard drive to the computer, it should be recognized automatically by your computer’s operating system.

Contents

Why the hard disk is not detected?

If your new hard disk is not detected by or Disk Manager, it could be because of a driver issue, connection issue, or faulty BIOS settings. These can be fixed. Connection issues can be from a faulty USB port or a damaged cable. Incorrect BIOS settings may cause the new hard drive to be disabled.



Where is the harddrive in a Asus laptop?

See also  Can you take a watermark off a picture?

While there are many ASUS laptop models that may differ in hardware design, the vast majority of ASUS laptops share a common hard drive location: behind a plastic panel on the bottom of the laptop.




What does it mean if my laptop says hard drive not installed?

You may encounter this error if the computer isn’t physically connected to the hard drive. So you can check the hard drive cable to ensure whether it has a loose cable connection or the SATA cable and power cable may have worn out.

What two cables are connected to the hard drive?

Any desktop computer hard drive has two connectors, one for power cable and other for data cable. Power cable connects a hard drive PCB (Printed Circuit Board) with computer’s power supply. Data cable connects the hard drive with a computer’s motherboard.

Where is harddrive located in laptop?

The most common type of hard drive is the side mounted slide hard drive, which the majority of new laptops use. On either the right or left side of the laptop, generally the side opposite the CD drive, there will be a small cut out section of the laptop case that can be slide out of the side of the computer.

Does removing a hard drive delete everything?

Computers can turn on and display the system BIOS screens without a hard drive, so removing the drive doesn’t damage anything — it just renders the computer useless.

Why is my hard drive disconnecting?

If your external hard drive keeps disconnecting, then possibly it is because of the power-saving feature. There is a USB selective suspend feature in Windows that turns off USB devices after a while to save power. This feature is designed to prevent your computer from using unnecessary power.

Why does my hard drive keeps disconnecting?

Check Your Power Plan Some users have reported that the main culprit behind the internal hard disk getting disconnected was a faulty power source. When your power source doesn’t work properly, it doesn’t supply enough power to the HDD, making it disconnect repeatedly.

How long does an unplugged hard drive last?

If it is essential data, I would recommend no less then 2 years at maximum. If you can withstand some chance of minor data loss (e.g. a few corrupted sectors here and there), go with 5 years. It doesn’t take long to copy the data off the drive, and copy it back.

How do I connect an internal hard drive externally?

  1. Choose an internal hard drive.
  2. Mount the drive into the enclosure.
  3. Plug in the connections.
  4. Seal the hard drive enclosure.
  5. Connect the enclosure.
  6. Connect the enclosure to the PC.
  7. Plug and play the hard drive.

See also  Popular question: How can i reload win8 ?

How do I connect my internal hard drive to my computer?

How do I connect my laptop hard drive to SATA?

How do I get my computer to recognize a new hard drive?

Select Start, then Run (in Vista, just click Start). Type diskmgmt. msc and press ENTER for the Disk Management tool. You’ll find a square representing the new drive.

How do I enable hard drive in Asus BIOS?

How do I enable my hard drive?

  1. Open Start.
  2. Search for Device Manager and click the top result to open the app.
  3. Expand the Disk drives branch.
  4. Right-click the hard drive in question and select the Properties option.
  5. Click the Driver tab.
  6. Click the Enable Device button.
  7. Click the OK button.

How do I replace the harddrive in my Asus desktop?

  1. Unplug the data and power cables from the back of the old drive.
  2. The drive may be on a caddy that is itself screwed into place.
  3. Set the old drive to the side.
  4. Place the new drive into the caddy.
  5. Reverse the process – place the caddy and fix the new drive back into place.
  6. Plug in the cables onto the new drive.

How do I eject my hard drive from my Asus?

  1. Step 1 Hard Drive.
  2. Use the screwdriver to remove the rubber cap on the top of the backplate.
  3. Remove the screw that was uncovered.
  4. Remove the four screws located in the corners of the metal bracket.
  5. Push the hard drive away from the center until fully disconnected.

How do you destroy a hard drive?

You can destroy a hard drive by wiping its contents and disassembling its parts for ultimate security. If you’re donating, selling, or recycling a computer, you’ll want to make absolutely sure you’re not giving away the personal and private information on your hard drive.

How do I boot my ASUS laptop into recovery mode?

To force ASUS laptops into recovery mode with Windows 10, before powering on the computer, press and hold F9, and then press the power button. Keep holding the F9 button until you see the initial Windows Recovery screen, from which you can boot up your computer, turn it off, or troubleshoot.

How do I fix reboot and select proper boot device ASUS?

  1. Restart your computer.
  2. Press the necessary key to open BIOS menu. This key depends on your computer manufacturer and computer model.
  3. Go to the Boot tab.
  4. Change the boot order and list your computer’s HDD first.
  5. Save the settings.
  6. Restart your computer.

See also  How can i find out which model pavilion dv7 notebook i have ?

How do I reboot my ASUS laptop?

What is the new connector used in hard disk drive nowadays?

Modern bit serial interfaces connect a hard disk drive to a host bus interface adapter (today in a PC typically integrated into the “south bridge”) with one data/control cable. Each drive also has an additional power cable, usually direct to the power supply unit.

What connector does a hard drive typically use?

Serial ATA (SATA) Serial ATA is the most common connection for internal drives in modern PCs and Macs. There can be multiple SATA ports on any one motherboard or controller card. One cable connects one hard drive to one port on the motherboard (as opposed to Parallel ATA).

How do you connect a hard drive to a power supply?

How do I replace my laptop hard drive and reinstall operating system?

  1. Back up data.
  2. Create a recovery disc.
  3. Remove the old drive.
  4. Place the new drive.
  5. Reinstall the operating system.
  6. Reinstall your programs and files.

How do I replace my laptop hard drive without reinstalling Windows?

  1. Run MiniTool Partition Wizard.
  2. Click Migrate OS to SSD/HD Wizard.
  3. Choose option B to only move Windows 10 to a new hard drive.
  4. Select a target disk.
  5. Choose a copy option.
  6. Read the note and click Apply at last.

Where is the harddrive in a desktop?

Usually, the storage drive is an internal drive; located inside the computer case. Internal drives come in a variety of storage sizes and can be replaced if you don’t have enough storage space. You can set up a computer with an external drive in addition to the internal drive.

Will a laptop turn on without a hard drive?

It’s totally safe to turn on any PC without it’s HDD. Here’s also a support document from HP about BIOS that may help.

Do you need to reinstall Windows after replacing hard drive?

Do You Need to Reinstall Windows after Replacing the Hard Drive? Reinstalling Windows after hard drive replacement isn’t necessary. Windows does a good job of reconfiguring itself after you replace the hard drive. You have to ensure there’s a proper backup of your data before taking action.

Can you use a laptop without a hard drive?

A computer can still function without a hard drive. This can be done through a network, USB, CD, or DVD.




Posted in faq

Leave a Reply

Your email address will not be published.