Asus notebook how to reconnect the diskpart ?



In this regard, how do I fix my Asus laptop hard drive?

Frequent question, how do I fix my ASUS boot device not found?

Amazingly, how do I enable hard drive in ASUS BIOS?

Subsequently, how do I reconnect my hard drive to my computer?



  1. Reconnect your drive and manually start the backup process.
  2. Uninstall recent updates.
  3. Make sure your drivers are up to date.
  4. Create a FileHistory folder.
  5. Choose not to copy the remaining files to a saved location.
  6. Delete the File History configuration files.
  7. Format your external hard drive and run File History again.

How do I reconnect my CD drive?

  1. Open the Settings app and go to Update & Security > Backup.
  2. Connect the external hard drive to the PC.
  3. In the Settings app click the “+” next to Add a drive.
  4. An on/off slider will appear under a new heading called “Automatically back up my files.”


How do I reinstall my hard drive drivers?

Right-click your hard drive, then select Update driver. Click Search automatically for updated driver software, then follow the on-screen instructions. To reinstall a driver, right-click your hard drive, then select Uninstall device. Once uninstalled, restart your computer.




How do I fix No drives found?

  1. Solution 1. Switch to a USB 2.0 Port.
  2. Solution 2. Set the partition where you want to install Windows to as Activeewe.
  3. Solution 3. Create a New Disc.
  4. Solution 4. Enable the xHCI hand-off Option in BIOS.
  5. Solution 5. Change everything to legacy and set the boot device to your DVD or USB.

See also  How big is a sheet of notebook paper ?

Why is my laptop showing boot device not found?

Boot device not found error occurs when the hard disk does not support the system boot process. As it indicates, Windows OS can’t find a bootable device to boot from. Usually, it can be an internal hard drive, external USB drive, optical CD/DVD ROM drive, and network adapter.

Why is my boot device not found?

Check your computer’s settings You need to make sure the BIOS is looking for the correct boot drive. Most computers have more than one disc, and if the BIOS isn’t programmed to load the right drive first, a boot device not found error will occur. (Instructions for checking the BIOS can be found here.)

How do I force restart my Asus laptop?

Please turn off the laptop (press and hold the Power button for 15 seconds until the Power light is OFF to force shut down) and remove the AC adapter, then press and hold the Power button for 40 seconds to do Hard reset. Note: Please don’t remove the AC adapter for ASUS laptop TP420IA and UX425IA model.

How do I enable CSM in ASUS BIOS?

Press the power button to turn on the computer, and then immediately press the Esc key repeatedly until the Startup Menu opens. Press F10 to open BIOS Setup. Use the right arrow key to select System Configuration, use the down arrow key to select Boot Options, and then press Enter. Check for Legacy Support in the list.

How do I enable CSM in BIOS ASUS?

Go to [Boot]③ screen, select [Fast Boot]④ item and then select [Disabled]⑤ to disable the Fast Boot function. Select [Launch CSM]⑥ item and then select [Enabled]⑦.

How do I reset my ASUS BIOS?

After reconnecting the power and booting, press and hold the delete key or F2 key to enter the BIOS to reset. 2. Restart, press DEL on the keyboard, enter the BIOS and press F5. After Load Optimized Defaults appears, select Ok, and the BIOS will return to the default value.

How do I reconnect my hard drive in Windows 10?

Go to the “Settings” app using the Win + I shortcut and open Update & Security > Backup. Click on the “+” (Plus) sign next to “Add a drive” and choose the external drive you connected to your machine. You’ll see the “Automatically back up my files” option, which is turned on by default.

How do I connect a hard drive to my laptop?

Connect the USB cable to the hard drive if not already connected and the other end to a USB port on the computer. Plug the other end of the USB cable into a USB port on the computer. After connecting the external hard drive to the computer, it should be recognized automatically by your computer’s operating system.

Why is my drive not showing up?

See also  Frequent question: How do invisible watermarks work?

If the drive still isn’t working, unplug it and try a different USB port. It’s possible the port in question is failing, or just being finicky with your specific drive. If it’s plugged into a USB 3.0 port, try a USB 2.0 port. If it’s plugged into a USB hub, try plugging it directly into the PC instead.

What happens if you uninstall driver?

If you tick the “Delete the driver software from this device” checkbox, it will completely remove the driver and associated registry keys from your computer. Either action will render the device unusable until you install the device driver again.

How do I replace my laptop hard drive and reinstall operating system?

  1. Back up data.
  2. Create a recovery disc.
  3. Remove the old drive.
  4. Place the new drive.
  5. Reinstall the operating system.
  6. Reinstall your programs and files.

How do I replace my laptop hard drive without reinstalling Windows?

  1. Run MiniTool Partition Wizard.
  2. Click Migrate OS to SSD/HD Wizard.
  3. Choose option B to only move Windows 10 to a new hard drive.
  4. Select a target disk.
  5. Choose a copy option.
  6. Read the note and click Apply at last.

How do you fix no signed device drivers were found?

  1. Make partition active.
  2. Format hard drive.
  3. Create fresh bootable USB.

What is xdrive boot?

The X: drive contains files to boot to the recovery environment and the recovery tools. they are kept separate so even if the main os (which in this case is Windows 10) is corrupted and cannot boot, the X: partition will allow it to boot to the recovery mode and you can do recovery of the OS from there.

Where do you want to install Windows 10 no drives were found?

Setup the boot controller mode in BIOS: By setting up the correct BIOS interface and data exchange mechanism, the Windows 10 setup should be able to find the hard drive. Shut down the PC and turn it on. Get into the BIOS and choose ‘Advanced’ tab. Scroll down to ‘SATA Mode’ and tap Enter to choose AHCI mode.

How do I fix reboot and select proper boot device ASUS?

  1. Restart your computer.
  2. Press the necessary key to open BIOS menu. This key depends on your computer manufacturer and computer model.
  3. Go to the Boot tab.
  4. Change the boot order and list your computer’s HDD first.
  5. Save the settings.
  6. Restart your computer.

How can I enter BIOS if F2 key is not working?

  1. Make sure the system is off, and not in Hibernate or Sleep mode.
  2. Press the power button and hold it down for three seconds and release it. The power button menu should display. …
  3. Press F2 to enter BIOS Setup.

What is F12 boot menu?

If a Dell computer is unable to boot into the Operating System (OS), the BIOS update can be initiated using the F12 One Time Boot menu. Most Dell computers manufactured after 2012 have this function and you can confirm by booting the computer to the F12 One Time Boot menu.

See also  Popular question: How do i add a notebook into a stack in evernote ?

How do I turn off boot device not found?

Turn off the computer and wait five seconds. Press the power button to start the computer and repeatedly press the f10 key to enter the BIOS setup menu. On the BIOS Setup screen, press f9 to select and load the BIOS Setup Default settings. Press f10 to Save and Exit.

How do I fix no boot device found Press any key to reboot the machine?

  1. Disconnect External USB Devices.
  2. Check HDD for loose cable connection.
  3. Change Boot Order (Set Hard Drive As First Boot Device)
  4. Fix boot information of your system.
  5. Check And Fix Disk Drive Errors.

Where is reset button on ASUS laptop?

How do I restart my frozen ASUS laptop?

Please power off the laptop first. If the laptop is stopped on the logo screen, please press and hold the power button for 15 seconds until the power light is off to force shut down. Waiting for few seconds after the laptop is power off. Press and hold the [F2] button, then click the power button.

How do I reset my ASUS laptop keyboard?

Step 1 – From the login screen, click the power icon in the lower right corner of the screen. Step 2 – Hold the Shift key while you click Restart. Step 4 – Select Reset Your PC.

How do I know if CSM is disabled?

Find CSM under BIOS or Security menu depending on your motherboard, and double click on it. Click on ‘Disabled’. CSM will now be turned off on your Gigabyte motherboard. You will also see the Secure boot option.

What is CSM Boot mode?

CSM means “Compatibility Support Module” which is a sub-item in the Boot option in BIOS, and it appears on the later motherboard, the previous doesn’t have this option. CSM is a parallel item with Secure Boot.

Can not enable CSM?

Launch CSM option is always greyed out. try to disable intel platform trust technology and see if the option is available. Also try to use an older gpu or any gpu if you have one, disable the igpu if your cpu have igpu, save and exit, enter bios again, and see if the option isn’t greyed out.

What is CSM in setup?

The Compatibility Support Module (CSM) is a component of the UEFI firmware that provides legacy BIOS compatibility by emulating a BIOS environment, allowing legacy operating systems and some option ROMs that do not support UEFI to still be used.




Posted in faq

Leave a Reply

Your email address will not be published.